Guide to Thelema Solo 100W Box Mod: 5 Vaping Modes Setup

Among single-cell battery-powered e-cigarette devices, the Thelema Solo 100W Box Mod stands out for its rich performance and intelligent experience, integrating advanced mode support into a compact and portable body. For e-cigarette users who value both simplicity and depth, this box mod offers five different power/temperature modes—Wattage, Bypass, VPC, Voltage, and Temperature Control—supporting SS904, SS316, Ti, and N electrodes. Since selecting these modes affects the device’s performance with each inhale, understanding each mode and its configuration is more important than ever.

Overview and Getting Started with the Thelema Solo 100W Box Mod

The Thelema Solo 100W Box Mod is a single-cell device that uses 21700 batteries or 18650 batteries via an adapter; it delivers up to 100 watts of regulated output power and supports five user-selectable modes. Upon unpacking, please read the quick start section in the manual and check the hardware: battery orientation, 510 connector, cartridge/tank seating, and coil or RBA base status. Only use the recommended USB-C adapter for charging and avoid leaving the battery in the device for extended periods of non-use.

Generally, pressing the fire button five times quickly will turn the device on or off. Switching modes requires using the up/down buttons and the fire/select button simultaneously. The Thelema Solo allows you to store user presets, which is very useful if you need to switch between different coil types or e-liquid types. Mastering these basic operations will reduce subsequent setup errors and extend coil life and battery health. For complete information on supported modes and user settings, please refer to the official user manual.

Thelema Solo 100W Box Mod: Power Mode Settings and Practical Tips

Power mode is the most commonly used mode on the Thelema Solo 100W Box Mod. It allows you to set a fixed power level, and the device will attempt to deliver that power to the coil each time you inhale. This mode is simple and easy to use, ideal for sub-ohm tanks and standard coils.

Setting the Power Mode:

1. Use the Fire/Select button to enter the main menu.

2. Scroll to “Power” and select it.

3. Use the up and down buttons or the slider to select your target power.

Useful Tips:

Start with the middle of the recommended coil power range and gradually increase the power (2-5 watts), evaluating the flavor and temperature as you go. If the coil has a burnt taste, reduce the power and allow the wick to re-soak. When changing to a different coil type or liquid viscosity, readjust the power, as thicker VG e-liquids typically require slightly higher power to produce the same vapor production.

The power mode controls output power without involving temperature control. This makes it very intuitive and easy to use for beginners, while also meeting the needs of advanced users who require stable and reliable performance.

Bypass Mode Explained and Usage Scenarios

Bypass mode simulates a mechanical mod by directly supplying battery voltage to the coil, adjusting only based on the battery level and the device’s internal protection mechanisms. The Thelema Solo 100W box mod features a bypass mode, designed for users who prefer a direct, unregulated experience but also desire voltage regulation protection.

Bypass Mode Working Principle:

The device doesn’t attempt to adjust the power to a specific value; instead, it outputs a voltage close to the battery’s charge level. At a full charge, the output power is highest, resulting in the warmest and most intense vapor; as the battery charge decreases, both the output power and vapor temperature decrease.

When to Use Bypass Mode:

When you want the instant, powerful response characteristic of a mechanical mod, but also desire the safe power-off protection of a regulated mod. For advanced users who understand battery current limitations and coil resistance, bypass mode can enhance the throat hit and quickly produce a large amount of vapor when the battery is fully charged.

Safety Tips: Because bypass output is closely related to battery voltage, always use high-rate, high-quality batteries and avoid using damaged or broken batteries. Also, ensure the coil resistance is within the battery’s safe range; improper use of bypass mode increases the risk of overcurrent.

VPC Mode: Creating a Personalized Smoking Experience

The Thelema Solo 100W kit designs VPC mode for e-cigarette users who want to control the vapor curve of each puff dynamically. It allows you to define how the power changes over a short period during vapor inhalation—for example, a gradual increase in power at the start of inhalation, eventually stabilizing at a constant power, or a sudden power boost at the end of inhalation. Thelema Solo implements VPC functionality with acceptable resolution, allowing you to set multiple points within a 3-4 second timeframe for smooth power output changes.

Basic Setup:

1. Enter the menu and select VPC mode.

2. Use the interface to set the power points on the curve—this device typically allows you to set the number of segments and the power of each segment.

3. Save the curve to your user presets for quick recall.

Practical Applications:

A slow initial warm-up reduces sputtering and produces a smoother flavor experience with rich e-liquids. A brief, high-power “burst” at startup simulates the rapid power spikes of a mechanical e-cigarette while maintaining a safe, stable voltage. VPC is ideal when you want to compensate for the thermal inertia of a larger mesh coil or adjust the throat hit based on a specific tank/coil method.

Because VPC changes how heat is transferred over time, log your curves and test multiple times. Fine adjustments often significantly improve flavor and temperature. For users of the Thelema Solo 100W Box Mod, VPC is a clever way to personalize performance based on a combination of individual coils and e-liquids.

Voltage Mode and Its Application

Voltage mode lets you set the voltage the vaper mod tries to apply to the coil, rather than the wattage. On this box mod, voltage mode enables you to set the voltage directly. This provides a slightly different control method that is useful in a variety of situations.

Why can you use voltage mode in the following situations:

When you want to closely replicate the feel of a fixed-voltage device or battery, especially on a reconfigurable atomizer, where the resistance remains stable, in some cases, voltage adjustments may feel more direct for users from older mechanical or unregulated devices. When troubleshooting coil performance issues, voltage mode helps determine whether the problem stems from changes in coil resistance or wattage adjustment.

Setup Instructions:

1. Enter the menu and select Voltage.

2. Use the up and down control keys to adjust the target voltage.

3. Take a short inhale during testing and observe if the output is stable; if an abnormality is detected, the device will still take safety measures to shut off.

Voltage mode is not commonly used in everyday e-cigarette use because power control usually optimizes power output for different resistances. However, it remains a valuable tool in the Thelema Solo toolbox for fine-tuning and diagnostics, especially in RBA atomizer configurations where resistance values ​​are predictable.

Supports SS904, SS316, Ti, and Ni Temperature Control Settings

Temperature control mode is technically the safest mode, but also the one that requires the most careful setup. The Thelema Solo 100W box mod supports multiple temperature control modes, including SS904, SS316, Ti, and Ni.

TC Mode Basics:

1. Select the TC mode corresponding to your coil material (SS904, SS316, Ti, Ni).

2. Set the target temperature.

3. You can choose to set a power limit, which allows you to set a maximum power budget for the device, enabling it to reach the target temperature without overshoot quickly.

Important Setup Steps:

If required by your e-cigarette device, lock the resistance while the coil is at room temperature. Many devices require you to press a confirmation button to measure cold resistance; do so only when the coil is dry and at room temperature.

Set the appropriate temperature range for your material: Nickel and titanium typically require specific thermocouple modes, along with compatible solder wire and fasteners. SS316 and SS904 typically allow the device to use wire coefficients suitable for stainless steel solder wire in thermocouple mode. Additionally, before using temperature control mode, thoroughly wet the wick to prevent clogging; it only controls the coil temperature, not the wick’s dryness.

Achieve Consistent Performance with the Thelema Solo 100W

The Thelema Solo 100W box mod is designed for versatility: Power Mode offers simple operation; Bypass Mode delivers a pure vaping experience; VPC Mode allows for precise control of the vaping curve; Voltage Mode retains the classic features of traditional modes; and Temperature Control Mode ensures safety and supports various temperature control coils, including SS904 and SS316. By understanding the purpose of each mode and following the practical setup steps, you can customize this box mod to suit different methods, e-liquids, and vaping habits.