HOW TO UPGRADE ORION DNA GO TO ORION PLUS?

GET YOUR ORION PLUS IN 12 STEPS, 5 MINUTES

(*Only compatible with Windows System)

Please take down the pod before the upgrade.

Step 1 – Download the Upgrade Software

Step 2 – UnZip the file you downloaded(*zip) and open;

Step 3 – Install SetupEScribe2_INTL_SP19;

p1. Software file

p2.Install SP19

Step 4 – Then double click on the SP20 and upgrade to the Version 2.0 SP20.

p3.Software SP20

p4.Upgrade to SP20

Step 5 – Make sure the software installed is the V2.0 SP20.

                 Open the software installed, Choose “Help-About EScribe”.

 

p5. V2.0 SP20 EScribe

Step 6 – Choose language.

p6. Choose language

Step 7 – When connecting to USB, the connection will be prompted, click ok

(Tips:If there’s no prompt when you connect the second time, select Evolv DNA GO at the bottom.)

p7. SP20

Step 8 – Choose “Tools – Production Utility”.

                  p8. Tools – Production Utility

Step 9 – Log in your EScribe account or Regist.

                        Or log in the account we provided:

Account: info@lostvape.com

Password:lostvape

p9.Log in

Step 10 – Click browse and select the firmware and files to upgrade.

p10. Browse and Select from “Firmware&settings” File

Firmware & settings

Choose Firmware & Setting files from the zip files you downloaded.

p11. Files’ position

p12. Firmware files

p13. Settings files

Step 11 – Please cancel the “Fire test” and “Battery test”.

p14. Cancel the “Fire test” and “Battery test”

Step 12 – Click “Program&Test”button and start upgrade.

p15. Click “Program&Test” and finish

When the device flashes green light, the upgrade is successful.

(Tips:Do not touch the USB cable during the upgrade process.)

p16. 5 power levels

Problems while upgrade?

Send an email to info@lostvape.com with the heading “Upgrade Problem” and we’ll get back to you in three work days.