January 7,2026/Blog /By administrator

The 360° Galaxy screen Pod Kit: Tips for Extending Coil Life

For vapers who cherish a consistent, flavorful experience. Yet even the most advanced pod kits rely on one critical component to maintain peak performance: the coil. It is the heart of a vaping setup. The coil heats e-liquid to produce vapor, and its lifespan directly impacts flavor quality, vapor production, and overall value. A worn-out coil can lead to burnt tastes, weak clouds, and frequent replacements, disrupting the immersive experience the Pod Kit is designed to provide. Extending coil life is key to getting the most out of your device.

This article provides practical, easy-to-understand tips for the unique design of the 360° Galaxy Screen Pod Kit, helping you avoid premature coil burnout, save on replacement costs, and enjoy a stable, satisfying vapor every time you smoke.

Choosing the Right E-liquid Viscosity and Ingredients

The type of e-liquid directly affects the lifespan of the atomizer coil. Matching e-liquid to coil specs is crucial. Most pod kits use 0.35Ω to 2.5Ω resistance pods. These pods operate at power outputs of 5W to 35W. Each resistance is suited to a specific e-liquid viscosity. Low-resistance coils heat up faster and require e-liquids with fast wicking to prevent dry burning. High-VG (vegetable glycerin) e-liquids, while producing rich vapor, are more viscous and can clog low-resistance coils due to their lower wicking efficiency.

This can cause the coil to dry out during vaping, leading to coil burnout and rapid aging. For the MTL coil in the 360° Galaxy Screen Pod Kit, it is recommended to choose an e-liquid with a VG/PG (propylene glycol) ratio of 50/50 or a slightly higher PG content. For RDL coils, a 60/40 or 70/30 VG/PG blend ratio balances vapor production and wicking speed, reducing the risk of burnt coils.

Furthermore, avoid e-liquids containing excessive amounts of sweeteners or dark, high-nicotine concentrates. These can caramelize during coil heating, leaving a sticky residue that eventually clogs the coil and wick. Dark e-liquids, on the other hand, leave tar-like deposits on the coil, accelerating coil wear.

Thoroughly moisten new coils before use.

Proper moistening is fundamental to extending coil life, and neglecting this step is one of the most common causes of premature coil burnout. When a new cartridge is opened, the wick is dry, and the coil has no e-liquid to absorb. If you start vaping immediately after installing the cartridge, the coil heats the dry wick, causing it to burn within seconds—this damage is irreversible. Moistening ensures the wick fully absorbs the e-liquid, creating a barrier between the coil and the dry heat. To refill your 360° Galaxy Screen Pod Kit, first remove the cartridge top cap. Fill the cartridge to the recommended capacity, ensuring the wick opening is completely submerged in e-liquid. After filling, replace the top cap and let it sit for 10-15 minutes. This waiting time allows the e-liquid to penetrate the wick fibers, ensuring no dry areas remain.

Power and Temperature Control of the 360° Galaxy Screen Pod Kit

The adjustable power range (5W-35W) of the 360° Galaxy Screen Pod Kit is a major highlight, offering flexible power options for different vaping styles. However, using the appropriate power is also crucial. Each URSA coil has a recommended power range; exceeding this range will significantly shorten its lifespan. Too low a power level may result in incomplete vaporization of the e-liquid, leading to leakage and residue buildup; too high a power level will cause the coil to heat up too quickly, burning the wick and damaging the coil material.

Its display screen also allows for easy monitoring and adjustment of the power. For example, the recommended power range for a 0.8Ω MTL coil is 12W-17W. Using 20W or higher will cause the coil to overheat, resulting in a burnt coil and premature burnout. Conversely, using 10W or lower may leave unvaporized e-liquid residue in the coil, which will clog it over time. Make full use of the kit’s energy-saving mode to maintain a stable power output without generating unnecessary power.

Proper Refilling and Storage Habits

The way you fill and store e-cigarette cartridges also affects the health of the atomizer coil. The 360° Galaxy Screen pod kit features a top-fill, leak-proof design, but improper filling can cause bubbles, leaks, or a dry wick. All of these can damage the atomizer coil. When filling, follow the 2ml or 2.5ml volume markings to prevent e-liquid from seeping into the air intake or device connection port. Otherwise, leaks will occur, making it difficult for the wick to absorb properly. Excessive e-liquid can also damage the atomizer coil over time, as it will remain saturated for extended periods.

When filling, tilt the cartridge slightly and slowly pour the e-liquid into the filling port, avoiding direct contact between the e-liquid and the atomizer coil assembly. This prevents damage to the wick and the introduction of bubbles into the e-liquid, thus avoiding dry burning.

Also, store the pod kit in a cool, dry place, away from direct sunlight and high temperatures. High temperatures can cause excessive e-liquid dilution, leading to leakage and coil burn. In contrast, excessively low temperatures can cause the e-liquid to thicken, making it difficult for the coil to absorb. Avoid storing cartridges that are not filled with e-liquid for extended periods: either fill them or empty them to prevent the coil from burning dry or the e-liquid from spoiling.

Regularly clean cartridges and coils to prevent buildup.

Over time, e-liquid residue, sweetener deposits, and dust accumulate on cartridges and coils, affecting performance and shortening their lifespan. Regular cleaning removes these buildup deposits, ensuring even coil heating and efficient e-liquid absorption. Cleaning is very simple and requires no special tools.

Using a 360° Galaxy screen pod kit as an example, remove the cartridge and discard any remaining e-liquid. Disassemble the cartridge to access the coil and coil. Gently rinse the coil with warm water to remove surface residue. Avoid using soap or harsh chemicals, as they can leave residues that affect the flavor. For stubborn buildup, soak the coil in a small bowl of warm water or vodka for 15-20 minutes, then rinse thoroughly. Gently pat the coil dry with a clean paper towel and allow it to air dry for 2-4 hours before reinstalling.

Dampen a cotton swab with warm water. Wipe the cartridge body and air intake clean. Remove debris or e-liquid residue clogging airflow. Keep the connection ports clean and dry. Dirt or moisture harms the electrical connection. It can also cause uneven coil heating.

360° Galaxy Screen pod Kit: Long-Lasting Performance, Enjoy a Superior Experience

The 360° Galaxy Screen pod Kit combines innovative design, multi-functionality, and user-friendly features to meet the needs of both beginners and experienced vapers. Follow the tips in this article to extend coil life while enjoying consistent flavor and vapor production.

Features include a panoramic display for power monitoring, leak-proof top-fill cartridges, and compatibility with a variety of URSA coils. By adjusting your usage habits to suit the device’s design, you can not only extend coil life but also enhance your overall vaping experience.